Rank: Advanced Member
Joined: 11/1/2002(UTC) Posts: 7,606
Thanks: 8 times Was thanked: 137 time(s) in 135 post(s)
|
Hi there,
The textures must be applied in Liveview (3D) and not in 2D mode
There are few tricks to apply the textures 1 - Try to set the position of the little man close to the surface you wish to apply texture or color, however, you don't need to be on the floor to texture a floor, for example. If there are not interferences, you can even apply a texture from the chopper 2 - Never apply a texture or color through a window or door--> the windows' or doors' openings just render the surfaces as transparent, but the walls are still there 3 - If the room elevation is under the 0.00 level--> the little man elevation must be also under the 0.00 level 4 - Doors and windows-->apply the color / texture on the surfaces parallel with the wall where the door / window is installed
Hope this helps
Patricia |
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The Punch Software uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close