logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Patricia G.  
#1 Posted : Sunday, October 23, 2011 12:00:00 AM(UTC)
Patricia G.

Rank: Advanced Member

Joined: 11/1/2002(UTC)
Posts: 7,586

Thanks: 8 times
Was thanked: 132 time(s) in 130 post(s)
Hi Dave,

First, I'd suggest that you check the walls' elevation related with the topo levels, independently of the floor where they are located

Also, some tips

1 - To set the objects, walls, etc at the right elevation, you need to define the ceiling heights. To do this--> Design--> Default Ceiling Heights--> set the exact height of each level. By default, they are 96", this means that (if you don't set your custom heights) Punch will set the second floor at 96" from the grass and the 3rd floor at 192" from the grass

2 - The ceiling elevation is the bottom face of the ceiling. This means that if you the floor of the second floor (for example) is @ 108", and your 1st floor has a ceiling of 12", the ceiling elevation will be 96" and the settings of the cutout (if you have one) will be the same: elevation at 96"and thickness= 12"

3 - If you have floor cuts, verify if you adjusted the elevation--> must be the same thickness and elevation of the floor

Patricia
Patricia G.- Forum Moderator
My Website: Punchhelpers
My Facebook page: Punchhelpers on Facebook
My eBooks: Pat’s eBooks
My Store: Punchhelpers Store
Users browsing this topic
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.