Hi John,

In liveview you have different tools, depending of the versions
- Walk-through tools --> you will two little men (yellow and green)
- Flying around tools--> you will see two choppers(yellow and green) or just the yellow one in the very old versions
- The Aerial View tool in the Versions V12 and up --> click on the icon showing a satellite/ earth icon

Now in order to Walk-through inside the house--> use this system to start--> Set the screen as half floorplan / half liveview--> set liveview as Walk-Through (the little man)--> in the floorplan view, you will see an arrow symbol --> point the arrow with the mouse and move this arrow to position the desired Walk-Through view--> also if you rotate the point of the arrow, the Walk-Through point if view will rotate as well

Don't forget to set the little man elevation according with the level of the house--> so if you wish to visualize the second floor of your house, for example, and the floor elevation is 120" --> double click on the icon of the little man--> set the elevation at, for example, 160" (40 or 50"above of the floor elevation)
If you are working on a surface under the 0.00 level, you must set the elevation of the yellow (or green) man as negative. This means that if you floor elevation is -96, the elevation of the yellow (or green) man must be, for example, -60. Set the elevation double clicking on the yellow / green man

Hope this helps

Patricia

Hi John,

You're welcome! :-)
Glad to know it worked

Patricia