Hi Pat S.

In liveview you have different tools, depending of the versions
- Walk-through tools --> you will see a little man in the NexGen versions, or two little men (yellow and green) in other versions or just the yellow one in the old versions
- Flying around tools--> you will see a chopper in the NexGen versions, or two choppers(yellow and green) in other versions or just the yellow one in the old versions
- The Aerial View tool in the Versions V12 and up --> click on the icon showing a satellite/ earth icon

Now in order to Walk-through inside the house--> use this system to start--> Set the screen as half floorplan / half liveview--> set liveview as Walk-Through (the little man)--> in the floorplan view, you will see an arrow symbol --> point the arrow with the mouse and move this arrow to position the desired Walk-Through view--> also if you rotate the point of the arrow, the Walk-Through point of view will rotate as well
If you can't see the point and arrow--> set the zoom with a very low value (2D --> set zoom --> for example--> 10%) --> see attached

Don't forget to set the little man elevation according with the level of the house--> so if you wish to visualize the second floor of your house, for example, and the floor elevation is 120" --> double click on the icon of the little man--> set the elevation at, for example, 160" (40 or 50"above of the floor elevation)

Also, if you click the little man icon (or the yellow man in the old versions) --> using your mouse--> hold the left button --> go forward / backward / left right. The right button will look up and down (green man in the old versions). And in some programs the mouse wheel with change the elevation of the little man

Patricia

Hi there,

Did you press "Enter" after the changes? --> After writing any new value in the elevation bar (top) or the properties bar (right pane) like elevation, roof pitches, doors' dimensions, etc you need to press Enter in your keyboard so the change takes effect

Patricia

Hi there,

You can use Split Screen or 3D Full Screen indistinctly. I recommend Split screen to start and become familiar with the commands, but after this, you can use any 3D screen.

In 3D Live View you have 4 different tools:
- Walk-through tool => you will see a little man in Live view => to walk, confirm that you selected the little man and not the chopper
- Flying around tools => you will see a chopper in in Live view
- The Aerial View tool => you will see the icon showing a satellite/ earth icon to see a top aerial view
- Room View => select a room and then click on the icon showing a floor plan to see an aerial view of the room

In order to Walk-through inside the house => use this system to start => Set the screen as half floorplan / half live view (Split View) => set live view as Walk-Through (the little man)--> in the floorplan view, you will see an arrow symbol --> point the arrow with the mouse and move this arrow to position the desired Walk-Through view--> also if you rotate the point of the arrow, the Walk-Through point if view will rotate as well.
Of course, if you wish, you can use the mouse only => If you click the little man icon in the live view screen => using your mouse => hold the left button => go forward / backward / left right. The mouse wheel will look up and down. The right button will change the elevation of the little man.
If you wish to visualize the second floor of your house, for example, and the floor elevation is 120" --> double click on the icon of the little man--> set the elevation at, for example, 160" (40 or 50"above of the floor elevation)
If you can't see the point and arrow--> set the zoom with a very low value (2D --> set zoom --> for example--> 10%) --> see attached

Patricia
--> My website: www.punchhelpers.com
--> My all in one e-book for V18: Learning Punch Software (R): Training, Tools & Tutorials for V18
--> My all in one e-book: Learning Punch Software (R): Training, Tools & Tutorials - Second Edition
--> My e-book: Learning Punch Software (R): Basic & Advanced Training-Second Edition
--> My e-book: Learning Punch Software (R): Importing, Exporting and Printing-Second Edition
--> My e-book: Learning Punch Software (R): Power Tools-Second Edition
--> My free e-book: Learning Punch Software (R): Mini - Tutorials
--> My e-books free video presentation: Pat's e-books
--> My Facebook page: https://www.facebook.com/punchhelpers.links
--> My Tips & Tricks notes: https://www.facebook.com/punchhelpers.links/notes