|
(Old) Sprinkler Lines - Multi lines/colors on one tab
Hi, Using Arch Series 18.0. We have 9 valve sprinkler system. Read how you can move the sprinkler to another tab to change color. So, I put the different valves on different tabs. But how can I see them all on the same plan? Is there another way to distin
3Pines
,
6/25/2016 12:00:00 AM(UTC)
|
0
|
131
|
|
|
|
** Windows 10 Compatibility with Arch. Series 17.7.1
Is Architecture Series 17.7.1 compatible with Windows 10? Thanks, Tom
Harris, Tom
,
8/30/2015 12:00:00 AM(UTC)
|
0
|
210
|
|
|
|
** Can't hang blinds or draperies - Punch! Architectural Series 17.7
I can't figure out how to hang blinds or curtains/draperies. Every time I try, aiming at different "delivery" points, the image becomes part of the ceiling or the sides of the window or the inside framing. If I click on the clear "glass" areas, nothing ha
Brock, Alexandra
,
5/20/2016 12:00:00 AM(UTC)
|
0
|
447
|
|
|
|
** Fluorescent Lighting
I have just upgraded to Punch Architectural 18.0 and had hoped that some fluorescent lighting options had been added to the electrical object set. Unfortunately it appears that this is not the case. I have searched the forum and the only references I ca
Mundy, Lindsey
,
12/30/2015 12:00:00 AM(UTC)
|
0
|
144
|
|
|
|
** Adding Dirt to level ground
Have Arch Series 18 on Windows 7. Outside of moving all my topography lines is there a way to level an area? We have a sloped yard and I want to play around with the number of retaining walls that need to be built. The only way I see to do this is by movi
3Pines
,
3/25/2016 12:00:00 AM(UTC)
|
0
|
131
|
|
|
|
** View 2 of 3 floors, not all
Have Arch. Series 18 on windows 7. Is there a way to choose more than working floor or all floors? Can you explain the difference between Floor and Plan? Why "Move to plan" when you can't view that plan? Created a "Floor" for landscaping and topography
3Pines
,
3/25/2016 12:00:00 AM(UTC)
|
0
|
70
|
|
|
|
** Retaining Wall Not Floating ABove Topography
Hi, Have Arch Series 18.0 and am using Windows 7. After much trial and error, finally got all the correct topography input. AM trying to build retaining walls on the hillside. Click on the Retaining wall icon, then set length and height - fine. Next I try
3Pines
,
3/13/2016 12:00:00 AM(UTC)
|
0
|
118
|
|
|
|
** Drop Ceiling
Hi Pat, I don't see an option in the ceiling designer power tool to create a drop ceiling. Is there a suggested way to do this? Just a standard 2'x4' grid is all I'm looking for. Thanks! Tom
Newell, Tom
,
2/19/2016 12:00:00 AM(UTC)
|
0
|
95
|
|
|
|
** Increasing ceiling height on Sample Plan
I've increased the ceiling height on the Sample Plan (Country Farm House - Craftsman)from 8 feet to 10 feet by editing the Current floor - wall & interior/exterior elements box. Everything went well except the ceiling and supports on the rear Lanai and
Thiesson, Gary
,
1/22/2016 12:00:00 AM(UTC)
|
0
|
72
|
|
|
|
** Custom scales
hi Patricia, Is there a place where I can customize my plan scale and printing scale. All that's offered is 1/8, 1/4, 1/3, 1/2. I know you can print to fit page but that distorts the scale. If I choose the other common scales, they either take too many pa
GordonC
,
1/8/2016 12:00:00 AM(UTC)
|
0
|
160
|
|
|
|
(Old) setup for inches instead of metric at startup
Hello. I am having difficulty setting up the quickstart to inches. Currently it has defaulted to metric. I cannot switch until I have rendered it into plan form. How do I change the startup preference. Rob
ghettoyuppie
,
5/29/2012 12:00:00 AM(UTC)
|
0
|
132
|
|
|
|
** Photo Realistic Rendering Issues
Home & Landscape Design Architecture Series 17.7.1.1009; Windows 7; Why does part of the roof in the referenced rendering disappear when I choose the photo realistic setting? Also, why does the grass or lawn show up so dark in the image? The link below wi
Harris, Tom
,
12/14/2015 12:00:00 AM(UTC)
|
0
|
104
|
|
|
|
** Roof Rake
I am trying to make under my overhang flat with a birdbox on the corners. Is there a way to do this? I can't seem to do it with having to rig up a room with 1" walls and put it up there. I figured there may be an easier way than that. Also, is there a w
Love, Bridget
,
11/23/2015 12:00:00 AM(UTC)
|
0
|
70
|
|
|
|
** Estimator Generic Costs
Where can I find a generic master list for the evaluator package for V17? Surely, there must be one available for download. I realise prices change by region, but right now something generic will do. Even better if it was generic to North Florida.
Wolfhawk
,
5/28/2012 12:00:00 AM(UTC)
|
0
|
106
|
|
|
|
** Scaling tile
I'm setting up a shower wall with 12x12 tile on the lower half, an accent in the middle and smaller tile (Brancacci_FrescoCaffeBC03 Diamond) on the top. The smaller tile is a 6x6 set on the diagonal. When I bring the tile onto a 5' wall, it has over 20
Newell, Tom
,
11/4/2015 12:00:00 AM(UTC)
|
0
|
220
|
|
|
|
Important Information:
The Punch Software uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
