Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,631
Thanks: 8 times
Was thanked: 141 time(s) in 139 post(s)
|
Hi Mark, This is a very common problem and it happens when you try to import a file with several layers or a "dirty" file. I suggest to apply this tutorial http://www.punchhelpers.com/acadtutorial.htmlThis tutorial is valid for AS 18, AS 3000, AS 4000 as well as MLP If after the tutorial you can't import your file, just zip and send me the file, and I will be glad to check the file for you Patricia |
|
|
|
|
|
|
Rank: Newbie
Joined: 12/2/2004(UTC)
Posts: 0
|
Hi Patricia:
I'll check on this. The file came to me from my architect and I don't have Autocad. As soon as I can get back with him, I'll clean the file and see what happens.
Thanks much!
Best Regards, Mark
|
|
|
|
|
|
Rank: Newbie
Joined: 3/12/2006(UTC)
Posts: 0
|
I am trying to work efficiently with my architect by exchanging drawings. He uses Autocad. My export to him was partially successful, but he struggled with anomalies, which took more time to fix than if he had drawn the plans from scratch.
He sent me a dwg, which AS 18 failed to import. In frustration I purchased TurboCad Designer 11 for $29.00. It successfully imports dwg files with Autocad layers intact.
From TurboCad I exported each floor as an separate dxf file with all layers and a few objects intact.
I imported those dxf files into AS18. However, AS 18 failed to maintain any layers or objects. So I ended up with just lines.
AS 18 utterly fails to meet my needs of being able to share files efficiently with my architect.
TurboCad, a $29 program, proves that it is possible to import DWG files and preserve AutoCad layers. So when does Punch plan to revise their import utility to do the same.
Even better would be for Punch to figure out how to maintain not only layers but also objects. Is this ability coming in a future update?
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,631
Thanks: 8 times
Was thanked: 141 time(s) in 139 post(s)
|
Hi,
as we discussed lots of times in this Forum, Turbocad or Autocad or Excel or Punch or a hammer are excellent tools, if you use them for the purpose they serve.
Turbocad is a good DWG sw, if your purpose is just import a DWG plan and see the plans' layers. However, if you wish to see the same floorplan in 3D, you need additional resources, right? Then, if you need 3D, Punch is the right tool and Turbocad is not
In addition, I guess you are using AS 18 V6. The DXF results of this version are poor. I'd suggest to upgrade to V8 at least
Regarding Punch's plans for future versions, I really don't know. We (people answering questions in the Forum) are just volunteers
Hope this helps
Patricia |
|
|
|
|
|
|
Rank: Newbie
Joined: 4/24/2009(UTC)
Posts: 8
|
I have a landscape contractor that has asked for an autocad version be sent to him of a landscape design plan. Can I do this, and if so, how? I've sent him the plot plan in pdf already.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,631
Thanks: 8 times
Was thanked: 141 time(s) in 139 post(s)
|
Hi there,
Assuming that your Punch plan is ready
For versions 12 or older use--> Power tools --> DXF / DWG Exporter
For version 14, 15 or 16 --> Use --> File--> Export --> DXF / DWG
Patricia |
|
|
|
|
|
|
Rank: Newbie
Joined: 4/24/2009(UTC)
Posts: 8
|
I have version 12, are there upgrades available. I see in my reply that you refer to version 14, 15...??
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,631
Thanks: 8 times
Was thanked: 141 time(s) in 139 post(s)
|
Hi there,
I included all the options in my answer because I didn't know your version
Upgrade: the versions 14 and up are the Punch NexGen programs and they work differently
If you plan to continue with the Architectural Series (AS) programs, you can check the Home and Landscape Design Architectural Series
http://www.punchsoftware.com/p-3-home-and-landscape-design-architectural-series.aspx
Patricia |
|
|
|
|
|
|
Rank: Newbie
Joined: 4/24/2009(UTC)
Posts: 8
|
Thanks for your reply Patricia. However, I'm still confused. Are you recommending that I upgrade to the Home and Landscape NexGen version? Can I upgrade to this? Or do I need to purchase a whole different software package? Also, the ViaCad isn't recommended for landscape design purposes? Help!
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,631
Thanks: 8 times
Was thanked: 141 time(s) in 139 post(s)
|
|
|
|
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The Punch Software uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
