Hi Brian,

Regarding the door problem, please, check this answer I wrote 10 minutes ago (and specially, check the images)
Punchhelpers, "Elevation Editor - trim sticks out under the lower edge?" #7, 12 Jun 2006 7:21 am
You can see also the image attached

Regarding the walls' height, to determine the nature of the problem, the first step is a real map of the situation. To do this, go to the elevation editor and verify the wall heights.

If you set (for example) a wall height of 108", but you set the autofloor in 36", the wall height will be 108"+ 36"= 144"

In the image attached, I set the walls (in both levels) with 96", but the walls of the upper floor have autofloor= 12", therefore the real wall height in the 2nd floor is 108",as you can see

Hope this helps

Patricia

Hi Brian,

Glad to know that it worked!

Yes, sometimes the autofloor works is present even if is uncheck. Usually, I set it as 0.
5"--> enter--> uncheck

Patricia