Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,691
Thanks: 8 times
Was thanked: 149 time(s) in 146 post(s)
|
Hi Robert Probably, you have a lost element in a far corner or perhaps a point far from the plan (sometimes is just a small point). If so, you have some elements changing the ratio paper / drawing You can try to find the lost element (check each tab and the 3 levels, until you find the element) or you can try this. - Open a new and empty file in Punch - Open your plan--> Be sure that all the layers are present -->. By clicking on the name of the tab you have the option of viewing or hiding other tabs. Just check all the names of the tabs) - Lasso all the elements of the floorplan --> Don't use the "Select all" option!!! - Edit--> Copy - Go to the blank file you opened - Edit--> Paste - Save as (use other name to avoid confusion) - Try to print this new plan. Patricia --> My website: www.punchhelpers.com--> My e-book: Learning Punch Software (R): Importing, Exporting and Printing --> My Facebook page: https://www.facebook.com/punchhelpers.links |
|
|
|
|
|
|
Rank: Newbie
Joined: 7/20/2010(UTC)
Posts: 0
|
I am trying to enlarge a particular area of my floor plan and print it out. For instance just the Living/Dining area and nothing more. I can't seem to accomplish this. Help appreciated!
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,691
Thanks: 8 times
Was thanked: 149 time(s) in 146 post(s)
|
|
|
|
|
|
|
|
Rank: Newbie
Joined: 5/9/2011(UTC)
Posts: 0
|
I'm using H&L Design Pro, ver 14.2.3. Having the same problem as Robert in centering a drawing. Goes all over the place. There are no lost elements.
On another subject, where is the lasso? I don't see one anywhere.
Thx,
Ken
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,691
Thanks: 8 times
Was thanked: 149 time(s) in 146 post(s)
|
Hi Ken, Lasso in not the name of a Punch tool. In computing, it means the process of selecting / capturing elements inside a certain area. So in Punch, select the arrow --> select a point in the plan --> move the arrow --> you will see a rectangle and a color change --> all the elements inside the rectangle are "lassoed" You can't center the drawing in the page or you have empty pages? Did you try to print to PDF? Patricia --> My website: www.punchhelpers.com--> My e-book: Learning Punch Software (R): Importing, Exporting and Printing --> My Facebook page: https://www.facebook.com/punchhelpers.links |
|
|
|
|
|
|
Rank: Newbie
Joined: 3/23/2013(UTC)
Posts: 0
|
I go to the set up and I put in postcard and size. I put in the picture I want to print and it does not print the size of the postcard on my paper which is 8x11 and it has also printed small. What can I do?
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,691
Thanks: 8 times
Was thanked: 149 time(s) in 146 post(s)
|
|
|
|
|
|
|
|
Rank: Newbie
Joined: 2/8/2014(UTC)
Posts: 0
|
Image will not print full size on paper. Prints floor plan with very
large margins.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,691
Thanks: 8 times
Was thanked: 149 time(s) in 146 post(s)
|
|
|
|
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The Punch Software uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
