Rank: Advanced Member
Joined: 11/1/2002(UTC) Posts: 7,715
Thanks: 9 times Was thanked: 151 time(s) in 148 post(s)
|
Hi KSue,
If you have the plan in Punch, why do you need to trace it again? You can save a copy of your file, and work on the copy.
If you have other reasons, you can - Print the plan to fit the page, and then scan the plan - If you have an Adobe program in your computer, probably you have the PDF printer installed in your computer. You can save your plan as a PDF file, and from there, save the picture as BMP
Hope this helps!
Patricia |
|
|
|
|
Rank: Newbie
Joined: 9/5/2003(UTC) Posts: 0
|
I want to build an addition on my existing house, but I would like to run the estimator on just the addition part of the house to get an idea of what I'm getting into.
I've built a Punch! plan of my existing house and property and I experiment with different ideas, but when I run the estimator it estimates the whole house, and I just want the addition.
So I thought I could build just the addition part a lot easier if I had a trace of the existing floor plan.
Do you get what I'm saying? Is there an easier way to do it? Am I making sense? Won't be the first time if I'm not.
Thanks for the suggestions. I don't have a scanner, but I'll try the PDF suggestion, and I'm open to any more suggestions that you might have for what I'm trying to do.
Thanks again, Ksue
|
|
|
|
Rank: Newbie
Joined: 9/5/2003(UTC) Posts: 0
|
I knew there was going to be a really obvious answer that I just couldn't see. D'oh (Homer Simpson moment)
Thanks so much,
ksue
|
|
|
|
Rank: Newbie
Joined: 2/20/2006(UTC) Posts: 0
|
I have been trying to load a copy of my existing home into punch home design platinum-as yet I can not seem to accomplish that what do I need to do?
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC) Posts: 7,715
Thanks: 9 times Was thanked: 151 time(s) in 148 post(s)
|
Hi Toollady
The scanned plan must be as a bmp file if you use Plat 4.5.1. or jpg or bmp or wmf, etc if you use Plat V8
In the main menu--> Design--> Load floorplan trace image--> open you file--> OK Design--> Floorplan trace visible (checked)
Using the dimension tools, verify the dims--> Design--> resize floorplan trace
Lets us know if you need additional info
Patricia |
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC) Posts: 7,715
Thanks: 9 times Was thanked: 151 time(s) in 148 post(s)
|
Hi Ksue, Yes, I got your idea. There are other ways you can try. In my opinion, you will obtain better results if you: 1 - Build a file with your house + the addition and run the estimator. You will get the spreadsheet A 2 - Run the estimator of the file of your existing house. You will get the spreadsheet B 3 - The difference between the spreadsheet A and spreadsheet B will be the spreadsheet of your addition. The advantage will be that you will be able to visualize in 3D your house with the addition Hope this helps! Patricia --> My website: www.punchhelpers.com--> My NEW e-book: Learning Punch Software (R): Basic & Advanced Training --> My e-book: Learning Punch Software (R): Importing, Exporting and Printing --> My e-books free video presentation: Pat's e-books --> My Facebook page: https://www.facebook.com/punchhelpers.links |
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The Punch Software uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close