|
(Old) Second Story high ceiling question
Hopefully one last question in regards to heights. I have a first floor with up to 16' ceilings. I then have a second story that I would like to have 9' ceilings. The slider on the left for elevation only allows me to raise the ceilings a max of 20' fr
bjrohan
,
6/13/2006 12:00:00 AM(UTC)
|
0
|
154
|
|
|
|
(Old) 10 foot ceilings and 2nd floor problems
I am trying to create a house with 10 ft ceilings on the first floor, and then 9 foot celings on the second floor. The first floor I have drawn quite easily, changing all the wall heights to reflect the 10 feet. When I construct my walls on the second f
bjrohan
,
6/12/2006 12:00:00 AM(UTC)
|
2
|
277
|
bjrohan
6/12/2006 12:00:00 AM(UTC)
|
|
|
(Old) Moving House in Topo view
I started the Topo power wizard, and the house remains in the middle of the lot. How can I move the house anywhere BUT the middle of the lot, so that it matches where it will be placed on the lot, especially in relation to the topomap I scanned in of the
bjrohan
,
6/12/2006 12:00:00 AM(UTC)
|
0
|
188
|
|
|
|
(Old) Elevation Editor - trim sticks out under the lower edge?
I was just wondering if this is normal? I want to leave the 3 inch trim for doors, windows,e tc, but it sticks out of the lower edge of the elvations. Is the best way to make things look correct to just elevate the doors 3 inches?
courter, eric
,
11/8/2005 12:00:00 AM(UTC)
|
4
|
359
|
JLewis
6/12/2006 12:00:00 AM(UTC)
|
|
|
(Old) Topo Designer HELP !!!!
Just started to use Arch 4000.When in Topo designer all appears to be working well until upgrade current design. Error message appears .... This file has been damaged or was created by a more recent version of punch. Assistance will be greatly appreciated
Ziino, Denis
,
6/28/2005 12:00:00 AM(UTC)
|
7
|
347
|
Lindsay, Robert
6/12/2006 12:00:00 AM(UTC)
|
|
|
(Old) How do I select a smaller area from an already created lot?
Hi to all Some help required please. I created a lot of 800 x 800 with contours/elevation, roads, sidewalks, retaining walls, etc and everything works and looks fine just the way it should. I now want to select a smaller section, eg 300 x 300, from the la
AngeloA
,
6/9/2006 12:00:00 AM(UTC)
|
0
|
145
|
|
|
|
(Old) Reduce By Percentage
Hello, I have designed a floor plan, but may be over my amount I want to build. Is there a feature that I can select all and reduce complete plans by a certain percentage, and it would scale down the layout? Thanks JR
gaspower
,
6/6/2006 12:00:00 AM(UTC)
|
0
|
141
|
|
|
|
(Old) Door elevation
It seems when I place a door in a plan it is 6" or so below grade or "0" elevation. I have checked the elevation slider as well as the door elevation to make sure it was set at "0" but when I place doors they show under the house 6" or so on the elevatio
Billen, Kurt
,
6/5/2006 12:00:00 AM(UTC)
|
0
|
160
|
Patricia G.
6/5/2006 12:00:00 AM(UTC)
|
|
|
** siding and stucco...
Is there to have siding and stucco on the same wall? My house has siding on the lower 35" and the top is stucco.
Emerick, Kyle
,
6/5/2006 12:00:00 AM(UTC)
|
0
|
135
|
|
|
|
(Old) Starting w/ AS4000
I am looking for a recommendation. I have been drawing buildings with a pencil for 30 years. I started using your cad system and I am spending so much time drawing the most simplest of shapes and squaring them up etc, in practice, that I wonder how best t
Culbertson, Bart
,
10/31/2005 12:00:00 AM(UTC)
|
4
|
328
|
westhelen
5/31/2006 12:00:00 AM(UTC)
|
|
|
(Old) How to build a curved retaining wall?
I bought this software to figure out where I needed to build a retaining wall. I plan on using those blocks at Lowes that allow curved walls. I can't find a way to build a curved retaining wall. How can that be done?
bladerunner
,
5/29/2006 12:00:00 AM(UTC)
|
0
|
872
|
|
|
|
(Old) Stained glass windows
When I drag one of the stained glass materials to a window the only part of the window that looks like stained glass is the grill. How do I get a stained glass window? Thanks!
Hall, Bill
,
5/29/2006 12:00:00 AM(UTC)
|
0
|
147
|
|
|
|
(Old) Manual Dimensioning
Just would like to know whether the Series 4000 software has manual dimensioning capability. I curently have the Platinum version and that capability does not exist. Thanks for your help!! Bill
Schumm, William
,
12/12/2005 12:00:00 AM(UTC)
|
0
|
209
|
|
|
|
** Roofing Changes
Have you ever tried to change the roof dimensions while the roof is positioned in a non x axis (left-right)or in the y axis(vertical)? I have a house design where the "wings" of the house are at 45 degrees to the x or y axis (top view). I can change the
Babcock, Brian
,
5/26/2006 12:00:00 AM(UTC)
|
0
|
153
|
|
|
|
(Old) foundations
How can I make the foundation just a slab. Using the foundation primater it create walls 8 foot high. when I try to reset the wall hight it will not change. I just what to create a foundation that is a flat slab
Kurth, Richard
,
3/6/2006 12:00:00 AM(UTC)
|
1
|
187
|
Patricia G.
5/24/2006 12:00:00 AM(UTC)
|
|
Guest (37)
|
Important Information:
The Punch Software uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
