Rank: Newbie
Joined: 8/6/2005(UTC) Posts: 6
|
I have been trying to create a tree in plant editor but it comes out too small. I imported and masked the photo ok, I set the max height of the tree to 35 feet with medium growth and I assumed that plant editor would scale it correctly. I end up with a perfect looking tree, but only 3-4 feet tall. I checked that I had the height set to 35 feet not 35 inches. Any ideas?
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC) Posts: 7,630
Thanks: 8 times Was thanked: 141 time(s) in 139 post(s)
|
Hi todoftempe,
Yes, this situation happened to me once. This is what I found The plant editor will consider the height of the picture, independent of the elements contained in the picture. Therefore, if your tree has 36", for example, but it is inserted in a picture with size (scaled) of 360", Punch will consider the 360" not the 36" In other words, independent of the fact that you mask the "no plant" areas, and the fact they will render transparent, they will be considered as part of the plant by the plant editor The best solution, of course, trim the plant to a rectangle touching the borders of the plant
Check attached
Patricia |
|
|
|
|
Rank: Newbie
Joined: 8/6/2005(UTC) Posts: 6
|
Thanks,
That's a big help. It's working fine now.
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC) Posts: 7,630
Thanks: 8 times Was thanked: 141 time(s) in 139 post(s)
|
:-)
Thank you for the feedback!
Patricia |
|
|
|
|
Rank: Newbie
Joined: 11/12/2007(UTC) Posts: 0
|
Iam a new user when I mask from mask control, go to new,and from emage, it show that it is masked. But when I save it as bitmat to use in punch, it has a white back ground not transparent,can any body help.
Pete
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC) Posts: 7,630
Thanks: 8 times Was thanked: 141 time(s) in 139 post(s)
|
Hi Pete, You should use black RGB 0,0,0 for the masking, this is the only color rendered as transparent in Punch Patricia |
|
|
|
|
Rank: Newbie
Joined: 11/12/2007(UTC) Posts: 0
|
I am using punchmaster landscape home addition, and paint shop pro 7 to mask. when i use the mask, it works ok, when saved as gif and jpeg format. but when ai save as bitmap it has a white back ground, must be doing something wrong, sure need help Pete
|
|
|
|
Rank: Newbie
Joined: 11/12/2007(UTC) Posts: 0
|
how do I do that I have tryed everything I could think of Pete
|
|
|
|
Rank: Newbie
Joined: 11/12/2007(UTC) Posts: 0
|
I tryed flooding the background but it covered the hole picture, is there something I need to do before masking. Pete
|
|
|
|
Rank: Newbie
Joined: 11/12/2007(UTC) Posts: 0
|
I use psp 7 and the mask program- new-from emage-
lumnious- reverse mask Pete
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC) Posts: 7,630
Thanks: 8 times Was thanked: 141 time(s) in 139 post(s)
|
|
|
|
|
|
Rank: Newbie
Joined: 11/12/2007(UTC) Posts: 0
|
Thank you for your imput, I find after masking I make a new window the same size, with black background,and then paste a copy of the mask. It works for me. Again thanks
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The Punch Software uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close