Rank: Newbie
Joined: 9/3/2018(UTC) Posts: 4  Location: Southeast
|
Can the open/closed property please be added to the window and door shutters property panel? Something like the angle setting for the doors. It'd be nice to be able to see the shutters open and closed easily without replacing them with the closed variety and reapplying paint. Thanks Shutter Property SheetI apologize in advance for the way that the image has to be linked. The forum software won't interpret the link as an image or allow me to upload images directly and Microsoft won't publish the image without the wrapper. I, on my part, won't go out of my way to find cloud storage that doesn't fit my typical needs which are terribly minimal. Method of production. Insert a window in the wall from the floor tab, select the window using the selection tool. On the right side, change the property sheet from window to shutter. Please insert the control somewhere on this sheet of properties. [img=https://1drv.ms/u/s!Al_J5BKR0TQkjvoWDLd4nVGHdM0SWw]Shutter Property Sheet[/img]
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,693
Thanks: 8 times
Was thanked: 149 time(s) in 146 post(s)
|
Originally Posted by: L. Vaught  Shutter Property SheetI apologize in advance for the way that the image has to be linked. The forum software won't interpret the link as an image or allow me to upload images directly and Microsoft won't publish the image without the wrapper. I, on my part, won't go out of my way to find cloud storage that doesn't fit my typical needs which are terribly minimal. Please, follow this tutorial. Originally Posted by: L. Vaught Can the open/closed property please be added to the window and door shutters property panel? Something like the angle setting for the doors. It'd be nice to be able to see the shutters open and closed easily without replacing them with the closed variety and reapplying paint.
Thanks
Method of production.
Insert a window in the wall from the floor tab, select the window using the selection tool. On the right side, change the property sheet from window to shutter. Please insert the control somewhere on this sheet of properties. You can open / close the shutters, but keep in mind the different models and hardware => if you close the shutters with models showing the hardware, these elements will appear on the outside. Anyway, in order to close louvered shutters, for example: 1 - In you case, you are showing swing shutters. Examine the Properties bar => notice that the horizontal offset in the open shutters is zero (outlined in red). This means that the distance of the shutters to the trim is zero, as you can see in this image (that I am loading from my computer)  Shutter open.jpg (37kb) downloaded 3 time(s). 2 - As the shutter width is 18" (see green arrow in the image below), you just need to change the horizontal offset from 0" to -18" => as you can see the image below (that I am loading from my computer) if you change the offset to -18" (outlined in red), the shutter will appear closed. Shutter closed.jpg (37kb) downloaded 1 time(s).Hope this helps! |
|
|
|
|
|
|
Rank: Newbie
Joined: 9/3/2018(UTC) Posts: 4 Location: Southeast
|
Just so you are aware, what your post showed me was:  Also, my toolbar looks like:  Note that it doesn't have the paperclip tool I have however discovered the album function and so I'll use that. The problem with adjusting the horizontal adjust is that it doesn't actually turn the shutters over if you are showing a shutter with hardware. See the following two images  
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,693
Thanks: 8 times
Was thanked: 149 time(s) in 146 post(s)
|
Hi there, Originally Posted by: L. Vaught
The problem with adjusting the horizontal adjust is that it doesn't actually turn the shutters over if you are showing a shutter with hardware.
Yes, this is exactly what I wrote in my post Originally Posted by: Patricia G. You can open / close the shutters, but keep in mind the different models and hardware => if you close the shutters with models showing the hardware, these elements will appear on the outside. The shutters, in this case are components, therefore their elements can't be changed. Of course, you can create / use the shutters as accessories, that will look as desired. Regarding the images and tools => not sure why you don't see the images or paper clip. I sent the case to the Forum programmers. Best, |
|
|
|
|
|
|
Rank: Advanced Member
Joined: 11/1/2002(UTC)
Posts: 7,693
Thanks: 8 times
Was thanked: 149 time(s) in 146 post(s)
|
Hi there, I was told by the Forum programmers that the images' issues were fixed  Let us know if you are still experiencing problems. |
|
|
|
|
|
|
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Important Information:
The Punch Software uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
