PC Windows 11 Home Design-Architectural Series 21.0.0.1026

I have a home with an 8' exterior wall. Running parallel is another short garden wall 6' in height and 10' long. The two walls have 7 decorative beams connecting the exterior wall to the garden wall. The beams need to be at a 6' elevation on one end and 8' elevation where it connects to the roof. I attached a picture.
Front.jpg (107kb) downloaded 0 time(s).
There are beams available that I can create to right size, but the angle feature just moves the beam left to right it does not allow for two different elevations at either end. I can create the beam in framing, but you cannot view it except in the framing view. I would like the beams to show up in 3D view and be able to print the 3D pictures. In 2D I can place the beams there and fake that they are connect but actually they are not. Am I missing something because I would think beams could easily have different elevations especially for creating open exposed beams in ceiling? Thank you in advanced for your help. I am going to see if I can use anything in the ceiling designer.