|
(Old) Editing stacked windows
Hi all My house has a tall wall with stacked sets of windows. I can't seem to figure how to touch the lower sets of windows. I end up grabbing the wrong window and doing a correction. Can I lock or hide stock windows so I can fine tune or add windows on
perrymck
,
8/24/2005 12:00:00 AM(UTC)
|
3
|
419
|
Fitzpatrick, Larry
3/15/2010 12:00:00 AM(UTC)
|
|
|
(Old) Door Height
Door height seems to be stuck at 8'. WHen I enter another value, say 6'-8" and try to add the door, the width is fine, but the height reverts back to 8"-0".
jedbarker
,
6/16/2009 12:00:00 AM(UTC)
|
0
|
278
|
|
|
|
(Old) Sliding Doors
The project I am working on is a commercial site and we need to use sliding doors in several locations. At the moment all I am doing is leaving a hole in the wall (it seems to work sort of) but I am wondering if there is some way to pull in an sliding do
Atkinson, Bill
,
9/18/2008 12:00:00 AM(UTC)
|
0
|
505
|
|
|
|
** Editing windows
I am creating a model of a house with a custom roof slope of 9.11:12. I want to place a window with the top member (lintel) parallel with the roof slope. I use the trapezoid widow type in Punch, however, I'm unable to adjust the lintel slope, does anyone
Stang, Jorgen
,
2/15/2002 12:00:00 AM(UTC)
|
5
|
628
|
Patricia G.
4/25/2008 12:00:00 AM(UTC)
|
|
|
(Old) Plain flat door
I have Platinum V 12. I can't find a basic flat door style. ???
Johnson, Sue
,
11/26/2007 12:00:00 AM(UTC)
|
0
|
323
|
|
|
|
(Old) Custom Doors
I have downloaded a door file, which has three files in it. A POB,pob, and ppv. Were would I place these files to get them into the program, and useable? Thank you.
Trivett, Tim
,
9/10/2007 12:00:00 AM(UTC)
|
0
|
294
|
|
|
|
(Old) doors and windows
Is there any to change the defalt door size in what I do it is almost a100% 3/0x7/0 work and I'm always haveing to change from the 30" default to 36" that I use.
hunter
,
3/2/2002 12:00:00 AM(UTC)
|
2
|
456
|
scotd50
4/23/2007 12:00:00 AM(UTC)
|
|
|
(Old) Castle Design
Ok several questions, I'm trying to design a castle for a project, number one: any ideas how to make proper turrets? (as in dips in the wall at the top) number 2: any idea how to put in a draw bridge or something like a draw bridge? (At the moment I'm usi
thomas, simeon
,
3/22/2007 12:00:00 AM(UTC)
|
0
|
321
|
|
|
|
(Old) Windows in garage doors
Are windows in Garage doors an object that would need to be created (Door with windows inserted) or would it work to create a custom window over the garage door and decrease the elevation until it appears in the door where you want it? Thanks
EZoog
,
10/24/2006 12:00:00 AM(UTC)
|
0
|
384
|
|
|
|
(Old) Caribbean Style Shutters
I am able to find shutters, however, they need to tilt out from the bottom, like you'd see in the islands. I've tried skew the shutter to tilt out from the house, but it is not working!
Sharri
,
10/5/2006 12:00:00 AM(UTC)
|
0
|
249
|
|
|
|
(Old) Windows in the Elevation
When using the Elevation Power Tool, interior elements show through the windows. This is fine when trying to see what the house is going to look like when complete. However, for elevations for a permit, they don't look right. Is there a way to make the
Frame, Bill
,
2/20/2006 12:00:00 AM(UTC)
|
0
|
300
|
Patricia G.
2/20/2006 12:00:00 AM(UTC)
|
|
|
(Old) Block Windows
Is there an option for block windows?
curts, laurie
,
2/7/2006 12:00:00 AM(UTC)
|
0
|
237
|
|
|
|
(Old) Minimum trim for a door?
The bifold doors I bought have a trim allowance of 0. I can't seem to set the trim on the bifold door in PHD-Platinum 8 to 0. I was able to set 0.01" which is close enough for most things, but I thought I'd ask if there is a way to do this...
Brown, David H.
,
6/7/2005 12:00:00 AM(UTC)
|
0
|
326
|
Patricia G.
6/7/2005 12:00:00 AM(UTC)
|
|
Guest
|
Important Information:
The Punch Software uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
